Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
236
Lake Controller Operation Manual Rev 1.5.9
Designer Mode Menu Reference
19.2.4.2 Summary
The Global Access functions apply an overall security to a particular Controller system and can be used in
addition to the system security settings.
19.3 Functional Reference Guide
This section provides an overview of the steps required for each Designer Mode process. This can be used
as a quick reference for the features described throughout the tutorial based on the procedure or function.
This section describes the standard functions using the LEVELS, XOVER, and EQ screens.
Designer Mode must be active to access the
functions described in this section.
19. 3.1 Xover/Aux/HPF/LPF Functions
These functions apply to base congurations and Modules only. The XOVER buttons listed below could read
Aux Output or HPF/LPF depending on the Module type.
19.3.1.1 Set Individual Xover Screens to Hide/View Only
1. Navigate to the XOVER screen.
2. Tap CROSSOVER FUNCTIONS.
3. Tap CROSSOVER VIEW ONLY or CROSSOVER HIDE.
The selected status illuminates orange.
The same process applies to AUX and HPF/LPF.
19.3.1.2 Set All Xover/Aux or HPF/LPF Screens to Hide/View Only
This process will affect all XOVER/AUX/HPF/LPF screens in the current system conguration.
1. From HOME, tap USER PREFERENCES.
2. Tap GLOBAL ACCESS.