Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
242
Lake Controller Operation Manual Rev 1.5.9
Designer Mode Menu Reference
2. Minimize the Controller and, using a text editor (such as Microsoft Notepad), create a text (.txt) le
containing the text you require.
3. Store this text le in the Lake folder in your Windows My Documents directory
e.g. My Documents\Lake\LakeController_vX.XX\Modules\Modules.txt
Since Lake Controller v6.3, user data les are stored
in My Documents\Lake. Or go to Start > All
Programs > Lake Controller vX.XX > User Data Files
for quick consistent navigation across all versions.
Figure 19-11: Storing a Module Help Text File
4. Maximize the Lake Controller and navigate to MODULE STORE/RECALL.
5. Select the Module le example from the scroll bar.
The text you entered appears above the Module as shown in Figure 19-12.
Figure 19-12: Module Help Text