Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
Lake Controller Operation Manual Rev 1.5.9
LM Series Reference and Operation
275
21. LM Series Reference and Operation
This chapter provides information specic to using the Lake Controller with LM Series devices. Please refer
to the LM Series Operation Manual for further details on LM Series hardware and front panel functionality.
21.1 Pass-Thru Input Router Functionality
21.1.1 Overview
Although other types of Lake device provide the ability to pass audio directly from any input to any output,
the LM Series devices provide the ability for the signal from any of the eight Input Routers to be patched
directly to any other output. This allows the result of automatic fail-over input priority switching to be fed to
the Module Input, or to any analog or digital output directly.
Figure 21-1: LM Series Signal Flow (Contour Mode)