Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
290
Lake Controller Operation Manual Rev 1.5.9
MY8-LAKE Reference and Operation
Figure 22-6: Signal Path for Mesa Module A in Simplied View
22.4.2 Classic View (All devices and congurations)
The standard fully functional Lake Controller I/O conguration view (Classic View) is also available for
MY8-LAKE Mesa congurations. Classic View is the only option available when the MY8-LAKE is cong-
ured in Contour conguration or in the Contour/Mesa hybrid conguration.
This view provides all standard input and output conguration options that are applicable for the
MY8-LAKE device as per normal Lake Controller operation; please refer to section 8.2 of this manual for
further information.
22.4.3 Changing between Simplied View and Classic View
To change between Simplied View and Classic View:
1. Tap Routing Mode at the bottom left of the screen
2. Tap either the Simplied View or the Classic View button depending on the view required
Figure 22-7: MY8-LAKE Routing Mode Summary
When switching from Classic View to Simplied
View, a router reset will be implemented to return
the routing to the default Mesa Conguration
routing.