Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
Lake Controller Operation Manual Rev 1.5.9
Command Line Options
299
25. Command Line Options
25.1 Overview
The Lake Controller provides a number of command-line options to enable or disable certain functionality.
These options may be entered when launching the Controller from a command prompt, or may be set using
a shortcut’s target option.
As an example, the following steps describe how to congure a shortcut on the desktop to launch the
Lake Controller in daylight mode:
1. Right-click on the Microsoft Windows desktop and select NEW > SHORTCUT.
2. When asked for the location of the item type the following, ensuring you use quotation marks as shown
below, and exchanging LAKE CONTROLLER vX.X for the Lake Controller the installation directory.
”C:\Program Files\Lake\Lake Controller vX.X\Lake Controller.exe” daylight
3. Tap NEXT.
4. When asked for a shortcut name, enter OUTDOOR.
5. Tap FINISH.
Multiple shortcut command line options may be
used by separating them with a space.
25.2 Reference
Table 25-1 on page 300 describes the options for command line functionality.