Lake Controller Operation Manual

54
Lake Controller Operation Manual Rev 1.5.9
Lake Controller Tutorial
Figure 4-45: Effect of Adjusting the Mesa Filter Slope
The same principle applies to the high-frequency edge (right side).
6. Tap and drag between the two center divider lines to change the frequency.
4.5 Crossovers
The Lake Controller, when used in conjunction with Contour loudspeaker Modules, allows real-time adjust-
ments to crossovers through the XOVER screen.
Crossover frequency and type and post-crossover equalization can be adjusted. In the default three-way
conguration, the Contour Module has 24 dB Linkwitz-Riley crossovers with center frequencies set at 250
Hz and 1.6 kHz. Tap the XOVER tab to view the crossover interface.
Figure 4-46: Crossover Screen
The low-output crossover is selected in this example. Use the crossover tool to change the center fre-
quency. The low and high parts of the crossover are currently combined. Tap the CROSSOVER SPLIT button