Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
66
Lake Controller Operation Manual Rev 1.5.9
EQ/Levels Menu Reference
6.1.4 Default Settings
The following example shows the available screens and default EQ overlays for a Contour loudspeaker
Module placed on the Main page of the Lake Controller.
Figure 6-2: Default Screen Tabs for Contour Loudspeaker Module
The default Module contains a Classic 3-Way (CL3way) crossover. The default tabs for this Module are:
▸ LEVELS Displays gain, delay and limiters
▸ XOVER Displays crossover and output EQ settings
▸ PEQ1 Parametric EQ overlay
▸ BLEQ2 Band Level EQ overlay
Tap the LEVELS tab to toggle between LEVELS and the XOVER / EQ screens.
These four screen tabs cannot be deleted, but they
can be hidden if required. Please refer to the
Designer Mode chapter in this manual for further
details.