Lake Controller Operation Manual

Lake Controller Operation Manual Rev 1.5.9
EQ/Levels Menu Reference
79
On a BLEQ overlay the EQ lters are linked together, creating bands. Changing one band will also change
the linked neighboring lter(s). By default, the BLEQ overlay has three bands. Any band can be split into two
bands making it possible to create up to eight bands.
When fewer bands are required, bands can be merged together. Select a band and then tap MERGE TO
RIGHT to merge the selected band with the band to the right; MERGE TO LEFT will merge the selected
band with the band to the left. The MERGE TO LEFT and MERGE TO RIGHT functions replace the
FILTER DELETE function for this overlay type.
Label Function Description
A
Frequency Lock
A/B
Filter Edit
Refer to section 6.3.6 on page 81.
B Filter Box
Displays the gain value of each band or the frequency & band-
width of the currently selected band.
Tap a lter box containing a single gain value to select a particular
band.
Double-tap the lter box to switch to Fine Adjustment mode.
Drag the lter box down to bypass the band.
Drag the lter box up to insert the band.
C
Merge to Left
Split Band
Merge to Right
Functions to combine or split the selected band
D Frame and Module Label Displays the currently selected Frame and Module labels.
E Filter Shape EQ Curve
The selected band is highlighted in light blue. The overall EQ
curve is identied by a white line.
F EQ Tool (Left Side)
Adjusts the lter bandwidth for the low-freq lter for the selected
band (and any adjoining lter)
G EQ Tool (Left Outer)
Adjusts the centre frequency of the low-freq lter for the selected
band (and any adjoining lter)
H EQ Tool (Centre)
Adjust the centre frequency of both lters for the selected band
(and any adjoining lters)
I EQ Tool (Right Inner)
Adjusts the centre frequency of the hi-freq lter for the selected
band (and any adjoining lters)
J EQ Tool (Right Outer)
Adjusts the lter bandwidth for the hi-freq lter for the selected
band (and any adjoining lter)
K EQ Menu Button Bar
The functions and submenus available on the EQ overlays are
described in the following sections.
Table 6-3: Function Descriptions for Band Level EQ Screen