Lake Controller Operation Manual
Table Of Contents
- 1. Welcome
- 2. Software Installation
- 3. Network & Firewall Overview
- 4. Lake Controller Tutorial
- 5. Home Menu Reference
- 6. EQ/Levels Menu Reference
- 7. System Store Recall Menu Reference
- 8. Modules Menu Reference
- 10. Groups Menu Reference
- 11. Solo/Mute Menu Reference
- 12. Icon Control Menu Reference
- 13. User Preferences Menu Reference
- 14. Pages Menu Reference
- 15. Network Menu Reference
- 16. Communication and Synchronization
- 17. Faults and Warnings
- 18. Analyzer Plug-in
- 19. Designer Mode Menu Reference
- 20. Lake-enabled Amplifier Reference
- 21. LM Series Reference and Operation
- 22. MY8-LAKE Reference and Operation
- 23. Keyboard Shortcuts
- 24. External Control Interfaces
- 25. Command Line Options
- 26. Firmware Update
- 27. Preset Manager
- 28. IP Address Reference
- 29. Corporate Information
Lake Controller Operation Manual Rev 1.5.9
EQ/Levels Menu Reference
93
6.4.3 Using EQ Filters on the Xover Screen
The XOVER screen provides low-shelf (B), Parametric (C), and high-shelf (D) lters to shape the audio
from each output as required. When used on the XOVER screen, the Parametric EQ lters affect only the
selected output.
Only EQ lter points and lter boxes of the selected
output are displayed. To select an output, tap the
associated green lter box and toggle between
outputs using the crossover tool.
Figure 6-15 on page 93 shows a Parametric lter used to affect audio on output 1, the rst channel of
Module A. Letter-labeled references in this example are used in the subsequent instructions.
Figure 6-15: Using Output EQ Filters on the Xover Screen
Although this Parametric lter crosses the range used by all outputs, it affects only the range of the selected
output. The curved white line identies the effect the Parametric lter has on output 1.