User's Manual

This document represents the latest PocketWizard functionality, the look of these menus are subject to change
3/19/2004 Using the PocketWizard options with the Kodak 14n and Kodak 14SLR v 2.1.doc
The following screen is displayed.
Pressing the right arrow of the NB allows you to
view the options of any of the selections. After a
selection has been made, pressing the OK button on
the back of the camera will save that option.
Selecting the Mode enables the following window
That displays the primary PocketWizard functions.
b. Transmit Mode
Selecting Transmit places this camera in Transmit
Mode. When the shutter is triggered, any remote
flash units or cameras set in receive mode, and
enabled on the same channel as this camera, will
fire.
c. Receive Mode
Selecting Receive places this camera in Receive Mode. When another PocketWizard
device (camera or PocketWizard MultiMax) is triggered, this camera will receive a signal
and fire, taking a picture. This camera must be on the same channel and zone as the
PocketWizard triggering device.
d. Setting the Channel
To set the Transmit Channel, use the
NB, selecting either the ones or tens
digits. The digits can be
incremented or decremented using
the up and down portion of the NB.
If the tens digit is highlighted and
the current number displayed is “1”
pressing the up portion of the NB
will cause this digit to become “2”. The right side of the NB would then be used to select
the ones digit. The user then uses the up or down function of the NB to select which
Channel 20 to 29 that will be used.
Once the Channel is set, press the OK button on the camera.
The Receive channel is set in the same manner.