User's Manual

This document represents the latest PocketWizard functionality, the look of these menus are subject to change
3/19/2004 Using the PocketWizard options with the Kodak 14n and Kodak 14SLR v 2.1.doc
The Test Flash option will confirm RF communication with all receivers that are enabled
on the current channel, and pop any flash units that are connected to those receivers. If
the camera radio is set up as a receiver, this mode will be grayed out.
g. Test Radio
The Test Radio menu allows the user to “ping” radios
that are enabled, determining if they are available for
trigger, without popping the flash.
h. Flash Confirmation
Flash confirmation is a feature that allows the user to examine the status of the strobes
after each shot if this option is set to ON.
After each shot, the
camera’s screen displays
the radios that were
detected. The display is
identical to the “Test
Flash” screen shown
previously. (The screen is
repeated here for clarity.) If all enabled Zones confirm after
a picture is taken, this screen will not appear. This screen
will only appear if one or more Zones fail.
i. Relay Mode
Selecting Relay places this camera in Relay Mode. When another device (camera or
PocketWizard MultiMax) is triggered, this camera will receive the signal, switch to
Transmit mode, and relay the trigger signal to another camera(s) and/or associated flash
unit(s).
Selecting Off turns off the radio and all associated functionality.