User's Manual
Table Of Contents
- Cover
- Introduction
- Table of Contents
- The FCC Wants You To Know
- Icons Used in this Manual
- Features
- Parts Reference
- LCD Information
- Controls
- Getting Started
- Mounting
- Quick Setup - Basic Radio Slave Operation
- Standard Radio Operation
- Menu System
- Main Menu
- Basic Settings
- Counter Menu
- Advanced Menu
- Other Features
- Applications of Advanced Functions
- Technical Information
- Troubleshooting
- Sustaining High Performance
- Time Conversion Charts
- Back Cover
20
Classic Channels
Classic channels are compatible with early PocketWizard
models and the PocketWizard Plus. Selective Quad-
Triggering is only available in channels 17 through 32. In
channels 1 through 16 the display will show CLASSIC
CHANNEL and zones A B C D do not appear. The A key
simply toggles the remote receivers on or off and is
displayed on the main screen as R. It is not possible to
toggle both the remote (A key) and the local flash (L key)
off at the same time when using a CLASSIC CHANNEL.
Operation on these channels is identical to the function of
the LOCAL / BOTH / REMOTE switch found on
PocketWizard Plus and Classic Transmitters.
L Key = On any channel the L key toggles the local flash on or off in a MultiMAX (set for
TRANSMIT mode).
☞
See the Connecting MultiMAX (set for TRANSMIT mode) to Flash section, Page 16,
for more information.
☞
The L key toggles Relay Mode when using a MultiMAX (set for RECEIVE mode). See
the Relay Mode section, Page 39, for more information.
TRANSMIT unit set to
CLASSIC CHANNEL 4
Remote and Local selected
TRANSMIT unit set to
CLASSIC CHANNEL 4
Remote and Local selected