User's Manual
Table Of Contents
- Cover
- Introduction
- Table of Contents
- The FCC Wants You To Know
- Icons Used in this Manual
- Features
- Parts Reference
- LCD Information
- Controls
- Getting Started
- Mounting
- Quick Setup - Basic Radio Slave Operation
- Standard Radio Operation
- Menu System
- Main Menu
- Basic Settings
- Counter Menu
- Advanced Menu
- Other Features
- Applications of Advanced Functions
- Technical Information
- Troubleshooting
- Sustaining High Performance
- Time Conversion Charts
- Back Cover
22
N
Confirmation can only be performed using MultiMAX units on channels 17 and higher.
PocketWizard Plus, Classic, and the original MAX do not perform confirmation.
N
True Confirmation is designed to work with one MultiMAX (set for RECEIVE mode) per
zone. Multiple RECEIVE units set to the same channel and zone will not individually
confirm and may cause incorrect confirmation errors. If multiple MultiMAX units (set
for RECEIVE mode) on the same channel and zone are a mix of flash and non-flash
confirmation units then accurate flash confirmation will not be reported.
The following table shows how confirmation works in different modes:
MultiMAX Mode Radio and Flash Confirmation
A RECEIVE unit using Selective Quad-Triggering Provides normal radio and / or flash confirmation
A RECEIVE unit set to a Delay mode Will not provide confirmation
A RECEIVE unit set to FAST MODE
Confirms on zone A only
A RECEIVE unit set to Intervalometer or Multipop Provides radio confirmation before the first interval only
Note: Older MAX and MultiMAX units set to FAST MODE will not confirm on any zones.