User's Manual
Table Of Contents
- Cover
- Introduction
- Table of Contents
- The FCC Wants You To Know
- Icons Used in this Manual
- Features
- Parts Reference
- LCD Information
- Controls
- Getting Started
- Mounting
- Quick Setup - Basic Radio Slave Operation
- Standard Radio Operation
- Menu System
- Main Menu
- Basic Settings
- Counter Menu
- Advanced Menu
- Other Features
- Applications of Advanced Functions
- Technical Information
- Troubleshooting
- Sustaining High Performance
- Time Conversion Charts
- Back Cover
25
MaIn Menu
From the main screen press /MENU to enter the Main Menu. The ▲▼ arrow keys can
be used to highlight a menu function. Press /MENU to select that function. You can
also press the corresponding letter as listed below.
A: Advanced Menu – /MENU A
Press A to enter the Advanced Menu. The Advanced Menu
contains Delay modes (including Rear Curtain Sync),
Intervalometer, Multipop, and SpeedCycler modes.
B: Basic Settings – /MENU B
Press B to enter the Basic Settings menu. It contains
Contact time and Beep menu.
C: Counter Menu – /MENU C
Press C to enter the Trigger Counter Menu which contains Counter direction, and other
counter functions: Reset / Clear, Disable, and Load.
D: Go Advanced – /MENU D
D: Go Normal – /MENU D
Press D to toggle between the last Advanced mode used
and Normal mode.
This function enables a quick return to standard or normal
operation from an advanced function. The settings of the
advanced function are saved.
Î
Go Normal is a quick way to get to standard radio slave operation after using
advanced functions and menus. Use this function to “turn off” an advanced mode and
use the MultiMAX as a radio slave only.
Main Menu
Go Advanced
Main Menu
Go Advanced
Main Menu
Go Normal
Main Menu
Go Normal