User Manual

- If a menu is displayed, pressing */MENU will select the highlighted item. Use the key
to exit the menus at any time.
- If a numeric entry is displayed, pressing */MENU stores the displayed number in
memory and proceeds to either the next input screen or the main screen depending on
mode.
In the next chapters many of the headings will be followed by /MENU and some letter
combinations. These are quick references for the keys to press to get to that function
fast.
Numeric Entry
Several menu items require a number or value to be entered. Numeric entry is
performed with
A B C D and ^v keys. The A B C D keys each select and add 1 to a specific digit as
follows:
A Ð selects and adds 1 to the 4th digit from the right
B Ð selects and adds 1 to the 3rd digit from the right
C Ð selects and adds 1 to the 2nd digit from the right
D Ð selects and adds 1 to the rightmost digit
Once a digit has been selected, use the ^v keys to adjust the number. Press and hold
^v for faster entry.
Numbers entered in this fashion are saved when the */MENU key is pressed and will
remain saved even after power is turned off. If the unit is powered off while a numeric
entry screen is displayed, the displayed number will not be saved.
L can also be used in Numeric Entry. In some cases, D and L select the same digit
To perform a Lag Time Measurement, use Equalize Mode (see Page 34) which requires
that the MultiMAX II be set for RECEIVE
To quickly get to the lowest setting press and release the A key once (selects the
highest digit) then press and hold the ? key.
MAIN MENU
From the main screen press */MENU to enter the Main Menu. The ^v arrow keys can be
used to highlight a menu function. Press */MENU to select that function. You can also
press the corresponding letter as listed below.
A: Advanced Menu Ð */MENU A