User Manual

operation.
COUNTER MENU
Press */MENU C enter the Counter Menu. This menu controls the counter functions of
the MultiMAX II. The counter can show the total number of triggers. Count is
incremented on every trigger from any source: PORT 1, TEST button, Hot Shoe, or
Radio Trigger.
A: Count Up + Reset Ð */MENU C A
Count is set to COUNT UP (example: 0,1,2,3,...) and the counter is reset to 0. The main
screen will display COUNT ^: 0.
B: Count Down + Reset Ð */MENU C B
Count direction is set to DOWN (example: 10,9,8,7,...), you are prompted to enter a
count, then the counter is reset. The main screen will display COUNT R: XXXX
The count down function could be used to indicate the number of remaining frames for a
remote camera.
C: Clear / Reset Ð */MENU C C
Count direction is not changed. Counter is reset to 0 if count direction is set to up, or the
counter is reset to the load value if count direction is set to down. If the counter is
disabled, then this function will enable the counter using the last count direction set. The
Counter is cleared and reset in this fashion when the unit is powered down.
Counter Menu
TRANSMIT unit set to Count Up
Load Counter Screen
Use * C C as an easy to remember quick key combination for fast counter reset.
D: Disable Ð */MENU C D
Counter is disabled and is not displayed on the main screen. While disabled the counter
does not count.
ADVANCED MENU
Press */MENU A to enter the Advanced Menu. This menu contains the advanced
functions of the MultiMAX II.
Precision timing and sequencing operations are available in this menu.
Press */MENU D to cancel advanced functions and return to normal mode. See the
section on D:Go Advanced and D:Go Normal, Page 25.
A: Delay Menu Ð TRANSMITTER Ð */MENU A A