Product Specs

Your device may get hot to the touch; this is normal. Unplug the device and let it cool before removing it. This device complies with applicable

surface temperature standards and limits deﬁned by the International Standard for Safety (IEC 60950-1). Still, sustained contact with warm

surfaces for long periods of time may cause discomfort or injury. Keep the device in a well-ventilated area when in use. Allow for adequate air

circulation under and around the device. Do not expose the device to water or extreme conditions (moisture, heat, cold, dust), as the device may

malfunction or cease to work when exposed to such elements. Do not attempt to disassemble or repair the device yourself. Doing so voids the

limited warranty and could harm you or the device. This device is not designed, manufactured or intended for use in hazardous environments

requiring fail-safe performance in which the failure of the device could lead directly

to death, personal injury, or severe physical or environmental damage.

The WiFi Pineapple is a network administration and pentesting tool for authorized

auditing and security analysis purposes only where permitted subject to local and

international laws where applicable. Users are solely responsible for compliance with

all laws of their locality. Hak5 LLC and afﬁliates claim no responsibility for

unauthorized or unlawful use. © Hak5 LLC.

INTERFACE: (3) WiFi, (1) USB 2.0, (1) USB-C Ethernet

STANDARDS: USB 2.0, 802.11b/g/n

DIMENSIONS: 107 x 93 x 21 mm

FREQUENCY RANGE: 2.412 ~ 2.4835 GHz

POWER: 10W (USB 5V 2A)

OPERATING TEMPERATURE: 35ºC ~ 45ºC

STORAGE TEMPERATURE: -20ºC ~ 50ºC

RELATIVE HUMIDITY: 0% to 90% (noncondensing)

SETUP LED STATUS INDICATIONS

IN THE BOX

SPECIFICATIONS

Starting up

Ready

Invalid USB Files

Flashing Firmware

DO NOT UNPLUG POWER

BLINKING BLUE

SOLID BLUE

SOLID RED

ALTERNATING

BLUE/RED

SAFETY INFORMATION AND WARNINGS

Full documentation at docs.hak5.org