Instruction Manual

Chapter 3: Getting Started

Product Service 1-800-522-7658, International 816-333-8811

Connect to the Blower Inlet for

Fiberglass Blowers

Fiberglass Blowers, model numbers 7180000 through 7180700,

feature a 10-3/8" OD inlet ring. This inlet ring is suitable for use

with 10-inch diameter PVC ductwork. The PVC ductwork will fit

outside the inlet ring and should be fastened by sheet metal screws

through the fiberglass inlet ring. A silicone sealant is to be used to

seal between the ductwork and the blower inlet ring to prevent air

or moisture leakage.

Fiberglass Blowers model numbers 7180800 through 7181700,

feature 12-3/8" OD inlet ring, which is suitable for use with 12-

inch diameter PVC ductwork. The 12-inch diameter PVC

ductwork will fit over the inlet ring on the blower and fastened by

sheet metal screws through the fiberglass inlet ring.

Fiberglass Blowers, model numbers 7182000 through 7182300,

feature a 15-5/8" OD inlet ring, which is suitable for use with 16-

inch diameter PVC ductwork. The 16-inch diameter PVC

ductwork will fit over the inlet ring on the blower and fastened by

sheet metal screws into the fiberglass inlet ring.

Connect to the Blower Inlet for

PVC Blowers

PVC Blower model number 7183000 features a 10-3/8" OD inlet

ring. This inlet ring is suitable for use with 10-inch diameter PVC

ductwork. The PVC ductwork will fit outside the inlet ring

through the PVC inlet ring. A silicone sealant should also be used

to seal between the ductwork and the blower inlet ring to prevent

air or moisture leakage.

PVC Blowers model numbers 7183100 and 7183200, feature a 12-

3/8" OD inlet ring, which is suitable for use with 12-inch diameter

PVC ductwork. The 12-inch diameter PVC ductwork will fit over

the inlet ring on the blower and should be fastened in position by

sheet metal screws into the fiberglass ring.

FRP

PVC