User guide
Chapter 4: Performance Features and Safety Precautions 
Product Service 1-800-522-7658 
22 
Original instructions 
The media of HEPA filters is fragile and should not be touched. Avoid 
puncturing either HEPA filter during installation or normal operation. If you 
suspect that a HEPA filter has been damaged, DO NOT use the cabinet; 
contact a local certification agency or Labconco at 800-821-5525 or 816-333-
8811 for re-certification information. 
The HEPA filters in the Procedure Station will gradually accumulate airborne 
particulate matter from the room and from work performed in the cabinet. 
The rate of accumulation will depend upon the cleanliness of the room air, 
operating time and the nature of work being done in the cabinet. The Filter 
Gauge accurately displays the amount of filter life remaining. 
Proper operation of the cabinet depends largely upon its location and the 
operator’s work habits. Consult the Installation and Normal Operation 
sections of this manual for further details. 
Avoid direct exposure of plastic or coated materials to ultraviolet (UV) 
radiation. Never bypass the UV safety interlock that only allows the UV light 
to work when the sash is closed. 
When surface disinfecting the Procedure Station: 
•  Avoid splashing the disinfecting solution on skin or clothing. 
•  Ensure adequate ventilation. 
•  Carefully follow the disinfectant’s safety instructions. 
•  Always dispose of disinfecting solutions in accordance with local and 
national laws. 
•  DO NOT allow disinfectants with high concentrations of free chlorine 
to contact the stainless steel components of the procedure station for a 
long period of time. Free chlorine will corrode stainless steel after 
extended contact. 
Procedure Stations should be decontaminated for any of the following 
reasons: 
•  Before maintenance work requiring entry into contaminated areas. 
•  Before HEPA filter changes. 
•  Before performing certification tests requiring entry into 
contaminated areas. 
•  Before relocating the cabinet. 
•  Before changing research programs. 
•  After the gross spill of biohazardous material or toxic chemicals. 










