Owner manual

Appendix D: Accessories
Product Service 1-800-522-7658
60
Hydraulic Base Stand Shelf Kit (# 3850200)
This 22 ¼ x 11 ¼-inch long shelf is specifically designed to hold the
Aspirator Pump or other small accessories, and attaches to the lower left side
of the base stand. The kit includes shelf and self-drilling fasteners. NOTE:
A power drill with a 5/16-inch socket is needed to attach the fasteners to
the base stand.
SoLo Electric Hydraulic Lift Base Stands
These base stands permit the Procedure Station to be lowered enough to be
transferred through a standard doorway as low as 78 inches. Casters provide
mobility and lock in place. The SoLo Stands for each Procedure Station
model is listed below.
Width
Procedure Station
Series #
115V SoLo Stand # 230V SoLo Stand #
4' 34800-xx 3780311 3780315
6' 34810-xx 3780313 3780317
*Service Valve Kit (# 3747500)
Includes serrated hose tip ball valve with quarter turn handle, hardware and
instructions for plumbing to services mounts on left or right side interior. All
cabinets are factory prepared to accept up to 4 fixtures. Shipping weight 4
lbs. (2 kg).
Ultraviolet Lamp Kits
Includes a 254 nm UV lamp and ballast.
Catalog # For use with Shipping Weight
3858500 All 115 VAC models 5 lbs. (2.3 kg)
3858501 All 100 VAC models 5 lbs. (2.3 kg)
3858502 All 230 VAC models 5 lbs. (2.3 kg)
IV Bar Kits
Bar supports intravenous solution bottles and bags. Kits include IV bar,
mounting hardware, and four hangers.
Catalog # For use with Shipping Weight
3858601 4-foot Procedure Station 4 lbs. ( 1.8 kg)
3858602 6-foot Procedure Station 6 lbs. (2.7 kg)