IN STRUC TION MANUA L Laboratory Equipment Pty Ltd email: sales@labec.com.au Ph: 02 9560 2811 • Fax: 02 9560 6131 www.labec.com.
Distilling Water Apparatus Operation Manual Model: J-WD Please read this Operation Manual carefully before use. Operation Manual J-WD-2-M-08-001 (REV.
Use of Operation Manual Please read through and understand this Operation Manual before operating the product. After reading, always keep the manual nearby so that you may refer to it as needed. When moving the product to another location, be sure to bring the manual as well. If you find any incorrectly arranged or missing pages in this manual, they will be replaced. If the manual gets lost or soiled, a new Operation Manual can be purchased.
SAFETY SYMBOLS This operation manual and this product use the following safety symbols. Please keep in mind the meaning of each of the symbols to ensure safe use of the product and to prevent any damages, accidents, or problems resulting from negligence of these safety symbols. (As using symbols may depend on the product, not all of the symbols may be used.) SAFETY SYMBOLS SAFETY SYMBOLS Indicates the possibility of personal injury or death. Never fail to follow the operating procedure.
Safety Precautions The following safety precautions must be observed and followed to avoid fire hazard, electrical shock, accidents, and other failures. Keep them in mind and make sure that all the precautions are observed and followed properly. Laboratory Equipment Pty Limited assumes no liability or any responsibility for any damages, accidents, or problems resulting from negligence of the precautions.
Maintenance To avoid electrical shock, be absolutely sure to unplug the AC power cable or stop applying power before performing maintenance or checking. Do not remove the cover when performing maintenance or checking. If the cover must be removed, contact your LABORATORY EQUIPMENT PTY LIMITED agent in advance. To maintain performance and safe operation of the product, it is recommended that periodic maintenance, checking, cleaning (every 3-4 months) and calibration be performed.
1. Intended use of the apparatus. Distilled Water Generator is an apparatus which generates pure distilled water by distillation. The definition of Distillation is "the process of heating a mixture and condensing the resulting vapour to produce a more nearly pure substance". Distillation is generally recognized as an effective broad spectrum water treatment method and removes many different kinds of contaminants including biological contaminants such as bacteria and viruses.
3.2 How to install • • • • Use with a minimum distance all around of 20cm from walls of other items. Locate in a flat place. Connect the power cord to an outlet with earthling point. In case of connecting to an outlet without earthling point, connect lead wire to the earth after connecting grounding adapter. 3.3 How to ground Earth wire • • • • • Earth wire must be grounded to prevent any electrical accidents. Improper or no grounding may cause electrical shock.
• • • • • • • • • • • • 4.2 How to operate Check rated voltage of the apparatus as well as check the specification Close ‘3’ drain valve. Connect cooling water supply hose to “2” and supply cooling water. Make sure water is running from “4”. Water starts running from “4” only after the inner tank is filled with water. Control the water pressure adequately so that water flows little from “7”. If water flow is big, then it might result in overflow of water leveller.
• • • 6. Trouble shooting. 1. In case apparatus fails to work at all:Control unit switched off:=> Ensure unit is on. Power supply shortage:=> Refer to specifications and check whether sufficient power is being supplied. => Is the breaker on the side of outer part open? Check if lamp is turned down. => Check unit in a power outlet that is known to work. If still does not work, contact your local LABORATORY EQUIPMENT PTY LIMITED agent/distributor & have it repaired. • 2.