User Guide

Creating equipment labels
Simply enter the required information to create
equipment labels.
1. Press .
When "Overwrite text?" appears, press
.
2. Use
/ / / to move the cursor to one of the lines, then enter
or edit text.
You can also change the default item names.
3. Press
.
Creating Special Labels
Creating Barcode Labels
MEMO
• You may not be able to add a barcode depending on the label type you create.
• Only up to two barcodes can be inserted in one label.
Supported barcode types:
EAN-8, EAN-13, CODE128, CODE39, QR CODE, ITF, CODABAR, UPC-A, UPC-E
1. Press
.
2. Select an item with
/ and press .
Move on to the next options until the setting is complete.
3. Enter the alphanumeric characters for the barcode and then press
.
4. Press
.
Creating Labels to Wrap Around Cable
+
You can repeatedly print text so that it can be seen
regardless of the angle from which the cable is viewed.
Label length
Tape width
Margin
Margin
1. Press + .
2. Select the length type with
/ and then press .
In this example, we will select "Length".
Dia: Sets the length by cable diameter.
Length: Sets the length by label length.
3. Enter the label length and then press
.
Setting range: 1 to 99.9cm
4. Select On or O of repeat text with
/ and then press .
In this example, we will select "On".
On
O
5. Select the type of margins with / and then press .
In this example, we will select "Long".
6. Enter the text.
7. Press
.
Creating Labels to Wrap around Cable
like a Flag
+
This label is useful for dierentiating cables because the ag
portion of the label wrapped around the cable is easy to see.
Block 1
Block 2
Space length
Separator
Text length
1. Press + .
2. Select the setting method of space length with
/ and then
press .
In this example, we will select "Length".
Dia: Sets the length by cable diameter.
Length: Sets the length by space length.
3. Enter the space length and then press
.
Setting range: 0.25 to 30 cm
4. Enter the text length and then press
.
Setting range: 0.25 to 30 cm
5. Select the type of separator with
/ and then press .
In this example, we will select "Line".
6. Select the orientation with
/ and then press .
In this example, we will select "Hori.2".
Hori.1
Hori.2
Vert.1
Vert.2
7. Enter the text of block 1 and then press
.
8. Enter the text of block 2.
9. Press
.
Creating Labels with Symbol
1. Press .
2. Select a category with
/ and press .
3. Select a symbol with
/ and press .
4. Press
.
MEMO
• For available symbols, see "Symbol List" on the separate sheet.
• If you transfer your original symbols from your computer, the symbols are saved in
the "Downloaded" category. For more details, see LW-PX750 User's Guide (PDF
version), which is available from http://labelworks.epson.com.
Creating Multiple Labels at Once
You can create many labels at once.
Margin Margin
Tape width
Labels number
Label length
1. Press .
2. Select the label length with
/ and then press .
Auto:
Automatically adjusts the label length depending on the length of text.
Set: Sets the label length.
Setting range: 1 to 99.9 cm
3. Enter the labels number and then press
.
In this example, we will enter "3".
4. Select the type of margins with
/ and then press .
5. Select the orientation with
/ and then press .
In this example, we will select "Hori.".
Hori.
Vert.1
Vert.2
6. Enter "Cable" and then press .
Similarly for other labels, enter text and press
.
7. Press
.
Creating Sequentially Numbered Labels
The number is automatically incremented each time a label is printed.
Up to four digits including numbers (0 to 9) and alphabet letters (a to z and
A to Z) can be entered.
1. Press .
2. Enter the start value of the sequential numbers and then press
.
In this example, we will enter "0001".
3. Select the number of repetition with
/ and then press .
In this example, we will select "2 times".
4. Press
+ .
5. Select "Print copies" with
/ and then press .
6. Enter the number of print copies and then press
.
In this example, we will enter "6".
7. Select "Start print?" with
/ and then press .
Printing starts.
Creating Labels with Block Sequence Numbers Assigned
+
You can assign sequential numbers to blocks.
Up to four digits including numbers (0 to 9) and alphabet letters (a to z and
A to Z) can be entered.
Block 1 Block 2 Block 3
1. Create the blocks in advance.
In this example, we have created three blocks.
2. Press
+ .
3. Enter the start value of the sequential numbers and then press
.
In this example, we will enter "CN01".
Sequential numbers are automatically assigned to block 2 and block 3.
4. Select the number of repetition with
/ and then press .
In this example, we will select "1 time".
5. Press
.
Cutting rounded label corners
You can use the PeelGuard to round o
label corners.
1. Insert the tape in the tape insertion slot,
following the guide.
The tape is cut to form rounded label
corners.
CAUTION
Turn o the printer and remove the batteries
before cleaning.
If the AC adapter is connected, disconnect
the AC adapter cable from the printer.

Exterior
Wipe the dirt o with a soft cloth.
If it is very dirty, use a damp cloth.
CAUTION
Never use chemicals or solvents such as
benzine, thinner, or alcohol, or use a chemical
duster.
Initialize the settings if the printer does not operate normally such as the display
is interrupted.
Attention
This function initializes the settings. Take extreme care before initializing it. All the
stored text and settings you made will be lost.
1. If the power is on, press to turn it o.
2. Press and hold
+ , and press .
3. When a message appears, press
.
The settings will be initialized.
Cleaning
Initializing the Settings

PeelGuard
WARNING
To prevent the risk of cuts, never insert ngers in the
PeelGuard.
1. Pull out the tray.
2. Remove the tape scraps, then insert the tray
back in the printer.
MEMO
To cancel initialization, press a key other than .

Printhead
Clean the printhead with a cotton swab.
Creating Labels with Self-Lamination
Overwrap
Use the dedicated Self-Lamination Overwrap.
This label tape comes with transparent lm. The lm
can be wrapped around the label to prevent it from getting dirty.
Label length
1. Enter the label length and then press .
Setting range: 1 to 99.9 cm
2. Enter the text.
3. Press
.
Default item
names
LabelDisplay
Tray
Guide
When you press
, you will see this area.