User Guide

Setting the Format and Style (Edit menu)
Customizing Labels
Saving Frequently Used Labels
Utilizing Print Functions +
Changing the Printer Settings +
You can decorate your label by setting the following.
Layout
Left, Center, Justify, Right
Adjusts the layout when multiple lines are used.
Frame & Table
Decorates the text with a frame or inserts a table.
Style
Outline, Normal, Shadow, S+O
Applies a character style to text.
Char. spacing
None, Narrow, Normal, Wide
Sets the inter-character spacing.
Border & Line
Strikeout, Underline, None, Border, Round brdr,
Shading, Brdr mesh, Round mesh
Applies border, underline, shade etc. to text.
Char. Width
Smaller, Small, Narrow, Normal, Wide
This allows you to change the width or height of
characters.
Bold & Italic
Italic, Normal, Bold, B+I
Changes the text in bold or italics.
Length
This setting is the same as when
is pressed.
"Setting the Label Length"
Margins
This setting is the same as when
+ is pressed.
"Setting the Margins"
Orientation
AB A
,
A
B
Sets the orientation of the text.
AB A
A
B
Font size
This setting is the same as when
is pressed.
"Changing the Font Size"
Font
This setting is the same as when
is pressed.
"Changing the Font"
Procedure for setting
1. Place the cursor.
Place the cursor on the left of the characters to
which you want to apply a function.
If you apply the function to a specic line or block,
conrm that the cursor is in the line or block.
2. Press
.
Example: to apply "Bold & Italic"
3. Select "Bold & Italic" with
/ and press .
4. Select "B + I" with
/ and press .
5. Select an area to which you want to apply the
function with
/ and press .
When "Character" is selected, the function is applied
to all characters on the right of the cursor.
Changing the Text Orientation
Changes the text orientation to vertical or horizontal.
MEMO
The setting items displayed when you press dier depending on the label type you create.
Changing the Font Size
You can change the font size of text or a block line by
line. Among the preset setting items, select one with
the same number of lines as that of the text or block you
want to change.
MEMO
You may not be able to change the font size depending
on the label type you create.
Changing the Font
Changes the font type of text.
1. Press
.
2. Each time you press
, the font changes.
Setting the Label Length
You can set the length of label or block.
MEMO
When creating a special label, you can set the length again.
Setting items for special label is displayed after pressing .
1. Press .
2. Select the setting method of the length with
/ and press .
Auto: Automatically adjusts the label length depending
on the length of text.
Set: Sets the label length.
Setting range: 1 to 99.9 cm
When "Set" is selected in procedure 2,
3. Select the alignment for the text with
/ and
press
.
Left, Center, Justify, Right
Setting the Margins +
Sets the left and right margins.
MEMO
You may not be able to set the margins depending on the label
type you create.
1. Press + .
2. Select the type of margins with / and press .
Minimum, Short, Middle, Long
Adding Block +
By dividing text into blocks, you can change the style and the
number of lines block-by-block.
Block 1 Block 2
Display Label
1. Press + .
A new block is started from the character next to the
cursor.
By saving frequently used labels, you will be able to easily recall and print from
them next time.
Up to 100 labels can be saved.

Saving a label
1. Press .
2. Select " Save " with
/ and press .
3. Select a registration number with
/ or the number keys and then
press .
The registration conrmation screen appears.
4. Conrm the registration number and then press
.

Recall the saved label
1. Press
.
2. Select " Recall " with / and press .
3. Select a registration number with
/ or the number keys and then
press .
The recall conrmation screen appears.
4. Conrm the registration number and then press
.

Deleting the saved label
1. Press .
2. Select " Delete" with
/ and press .
3. Select a registration number with
/ or the number keys and then
press .
The deletion conrmation screen appears.
4. Conrm the registration number and then press
.

Enlarge print
You can create a label that is larger than the width of a single label.
Print the created content separately on multiple labels and then put them
together to use as a single label.
1. Press + .
2. Select " Enlarge print " with
/ and press .
3. Select " *2size " with
/ and press .
4. Select " 2/2 " with
/ and press .
5. Select " Start print? " with
/ and press .
Printing starts.
MEMO
The function remains enabled even after printing. To disable the function, select "O".

Mirror print
On
O
1. Press + .
2. Select " Mirror print " with
/ and press .
3. Select " On " with
/ and press .
4. Select " Start print? " with
/ and press .
Printing starts.
MEMO
The function remains enabled even after printing. To disable the function, select "O".

Print copies
1. Press + .
2. Select " Print copies " with
/ and press .
3. Enter the number of print copies and then press
.
4. Select " Start print? " with
/ and press .
Printing starts.
MEMO
The function remains enabled even after printing. To disable the function, set the
number of print copies to "1".
Setting items
Auto cut
Auto cut:
Sets whether or not to cut automatically.
Half cut:
When "Auto cut" is set to "On", the function "Half cut" for precutting just the
label part to make the backing paper easy to peel o can be set.
Print density
Sets the print density.
Drop stop
This function is useful for axing consecutively printed labels one at a time.
Select "On" to avoid a printed label from dropping. A printed label stays at
the tape eject slot.
When printing multiple copies, printing of the second or later labels starts
each time you remove a printed label.
This function is only available when the label length is 28 mm or more, "Auto
cut" is set to "On", and "Half cut" is set to "O".
Backlight
Sets the display backlight to On or O.
Language
You can select the language shown on the display from the following:
Dansk, Deutsch, English, Español, Français, Italiano, Nederlands, Norsk,
Português-Br, Português-EU, Suomi, Svenska, Türkçe
inch:cm
The unit of length used to indicate the label size can be switched between
inch and cm.
MEMO
Version: To make sure the version number that has been installed in the printer.
Procedure for setting
1. Press + .
2. Select the desired function with
/ and press .
3. Select the desired item with
/ and press .
1. Press
.
Each time you press
, the setting switches between
"Horizontal" and "Vertical".
Horizontal
Vertical
When creating "Mix-Len"
1. Press
.
2. Select the orientation with
/ and press .
Hori.
Vert.1
Vert.2
MEMO
You may not be able to change the text orientation depending
on the label type you create.
Block 1
1. Press .
2. Each time you press
, the font size changes.
SansS.
CL Roman
Block 3
Block 2
Block 3
BR
B. Gothic
SansS. HG
Mincho
Reisho
Gothic
CB
Roman
Gyosho
SansS. ST
ScriptPL
US Roman