User Manual

22
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Creating Special Labels
Creating Labels to Wrap around Cable like a Flag
This label is useful for dierentiating cables because the ag
portion of the label wrapped around the cable is easy to see.
1. Press + .
2. Select the setting method of space length with
/ and then press .
In this example, we will select "Length".
Dia:
Sets the length by cable diameter.
(Setting range: 0.25 to 15 cm)
Length: Sets the length by space length.
3. Enter the space length and then press
.
Setting range: 0.25 to 30 cm
4. Enter the text length and then press
.
Setting range: 0.25 to 30cm
5. Select the type of separator with
/ and then
press
.
In this example, we will select "Line".
6. Select the orientation with
/ and then press
.
In this example, we will select "Hori.2".
Hori.1
Hori.2
Vert.1
Vert.2
7. Enter the text of block 1 and then press
.
8. Enter the text of block 2.
9. Press
.
MEMO
When label length is set to less than 1.8 cm, set the label cutting
method as follows.
Auto cut: On, Half cut: On
"Auto cut"
+
Block 1
Block 2
Space length
Separator
Text length