User Manual

23
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Creating Special Labels
Creating Multiple Labels at Once
You can create many labels at once.
1. Press .
2. Select the label length with
/ and then press .
Auto:
Automatically adjusts the label length depending
on the length of text.
Set: Sets the label length.
Setting range: 1 to 99.9 cm
When label length is set to less than 1.8 cm or
"Length setting is too short" appears on the display,
set the label cutting method as follows.
Auto cut: On, Half cut: On
"Auto cut"
3. Enter the labels number and then press
.
In this example, we will enter "3".
4. Select the type of margins with
/ and then
press
.
5. Select the orientation with
/ and then press .
In this example, we will select "Hori.".
Hori.
Vert.1
Vert.2
6. Enter "Cable" and then press .
Similarly for other labels, enter text and press
.
7. Press
.
Margin Margin
Tape width
Labels number
Label length