User Manual

28
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Creating Special Labels
If this function is enabled, the next label is not printed until
the current label is removed from the tape eject slot when
printing multiple labels. This is convenient when applying
each label while printing.
1. Press
+ .
2. Use
/ to select "Drop stop", and then press .
3. Use
/ to select "On", and then press .
Set to print multiple labels.
"Print copies"
MEMO
• When setting as follows, the Drop stop function is enabled.
• Length of one label: 2.8 cm or more
• Label cut settings
Auto cut: On, Half cut: O
"Auto cut"
• If a certain amount of time passes after printing a label and the
label has not been removed, the Auto power-o function will
cause the printer to turn o. Remove labels as soon as they are
printed.
"
Auto power-o"
When printing of the rst label is complete,
"Remove cut tape" is displayed.
Printing and cutting multiple labels one by one (Drop stop)
When the label is removed from the tape eject slot, printing of the next label
begins.
Remove cut tape