User Manual

32
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Customizing Labels
Setting the Margins
Sets the left and right margins.
MEMO
You may not be able to set the margins depending on the label
type you create.
1. Press + .
2. Select the type of margins with / and press .
Minimum, Short, Middle, Long
Adding Column +
By dividing text into columns, you can change the style and
the number of lines column-by-column.
Display
Label
Column 1
Column 2
Column 3 Column 2
Column 1 Column 3
1. Press + .
A new column is started from the character next to the
cursor.
Setting the Label Length
You can set the length of label or column.
1. Press
.
2. Select the setting method of the length with
/ and press .
Auto: Automatically adjusts the label length
depending on the length of text.
Set: Sets the label length.
Setting range: 1 to 99.9 cm
When label length is set to less than 1.8 cm or
"Length setting is too short" appears on the
display, set the label cutting method as follows.
Auto cut: On, Half cut: On
"Auto cut"
When "Set" is selected in procedure 2,
3. Select the alignment for the text with
/ and
press
.
Left, Center, Justify, Right
MEMO
When creating labels in one of the following modes, pressing
displays available setting items, and you can change the
length and other settings.
• Flag mode
• Cable wrap mode
• Mix Length mode
+