User Manual

35
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Changing the Printer Settings
+
Setting items
Auto cut
Auto cut:
Sets whether or not to cut automatically.
Half cut:
When "Auto cut" is set to "On", the function "Half cut" for
precutting just the label part to make the backing paper
easy to peel o can be set.
MEMO
An extra margin might appear at the front of the label
depending on the kind of tape, and length and margin settings
of the label. The length of the extra margin varies depending on
the setting conditions.
Print density
Sets the print density.
Drop stop
" Printing and cutting multiple labels one by one (Drop
stop)"
Backlight
Sets the display backlight to On or O.
Language
You can select the language shown on the display from the
following:
Dansk, Deutsch, English, Español, Français, Italiano, Nederlands,
Norsk, Português-Br, Português-EU, Suomi, Svenska, Türkçe
inch:cm
The unit of length used to indicate the label size can be
switched between inch and cm.
MEMO
Version: To make sure the version number that has been installed in
the printer.
Procedure for setting
1. Press + .
2. Select the desired function with
/ and
press
.
3. Select the desired item with
/ and press .