Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
11
Connection settings for connecting to computer
There are three dierent methods available for connecting to a computer, which are listed
below. Select the method that best matches your system environment.
Important
While installing the printer driver or other software, do not connect a network cable, a
USB cable, or any other connection cable to the printer until you are instructed to do so.
Memo
The network settings can be checked and changed later on. For details, check the page
listed below.
Î
Checking/changing the printer network settings (p.72)
Setting up a wireless LAN connection
(Infrastructure Mode)
Here, a description will be provided of the method for setting up a wireless LAN connection
in Infrastructure Mode. Select one of the below methods for conguring the settings.
Î
Conguring settings for a wireless LAN using automatic push button conguration (WPS)
(p.12)
Î
Wireless LAN settings using a PIN code (when automatically acquiring the IP address
from the printer) (p.20)
Î
Conguring settings for a wireless LAN manually (p.27)
Important
In order for wireless LAN settings to be congured, the computer needs to be connected
to a wireless LAN device such as an access point or router.