Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
18
Connection settings for connecting to computer
Follow the instructions on the screen to proceed with the settings
conguration procedure.
Once the instruction to press the [WPS] button for the access point appears on
the screen, check to make sure that the printer power is turned on and then
press the [WPS] button. The
/ lamp on the printer will begin to ash,
signaling the start of automatic conguration. Once the settings have been
congured, the
/ lamp will light up solid.
Check the [Register to Windows Firewall] checkbox, and proceed to the next
screen.
11.
12.