Compatibility Guide

20
Connection settings for connecting to computer
Wireless LAN settings using a PIN code (when
automatically acquiring the IP address from the printer)
This conguration method can be selected if the access point used is compatible with a
WPS PIN code input method. The description here lists procedures for when the IP address
for the printer is to be acquired automatically. After the network settings have been
congured for the printer and access point, install the printer driver and other necessary
software.
Memo
• A PIN code issued by an access point cannot be registered and set for a printer.
• For details on how to register a PIN code to an access point, refer to the manual for
the access point.
• When conguring the wireless LAN settings, set the computer, printer, and access
point up nearby to make it easier to run them as you will need to use all three to
complete the procedures.
• To set the IP address on the printer manually, refer to Conguring settings for a
wireless LAN manually (p.27) to congure the network settings on the printer
and then complete the below procedures starting from Step 1 to set the IP address.
Important
If planning to congure the settings automatically using a PIN code, use the included
tape cartridge to print the PIN code out from the printer.