Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
34
Connection settings for connecting to computer
Enter the network settings information that you have prepared in advance.
Press the [Select an SSID] button and select the target SSID. Then enter a
preshared key in the [PSK (Pre-Shared Key)] eld.
Memo
• Check to make sure that all necessary settings have been entered correctly.
• Press the [Select an SSID] button to pull up the SSID for the wireless LAN detected by
the printer. You will then be able to select the desired SSID, if the one you want is listed.
13.