Compatibility Guide

Table Of Contents

Connection settings for connecting to computer

Setting up a wireless LAN connection (Simple AP

Mode)

Here, a description will be provided of the method for setting up a wireless LAN connection

in Simple AP Mode.

The below conditions must be met before this connection mode can be used.

• The computer or phone to be connected is set up for wireless LAN and the wireless LAN

switch is turned on

• The computer is not connected to a network through a wireless LAN.

• The computer or phone is set up to acquire an IP address automatically

There are two methods available for conguring settings for a wireless LAN in Simple AP

Mode, as described below. First, try to congure the settings using the push button. If that

does not work to connect the printer, next try to congure the settings manually.

Conguring settings for a wireless LAN in Simple AP Mode using automatic push button

conguration (WPS) (p.40)

Conguring settings for a wireless LAN in Simple AP Mode manually (p.48)

Important

• Up to four devices can be connected at the same time with connections using

Simple AP Mode. You cannot connect a fth or subsequent device.

• You cannot connect devices other than a printer or connect to the Internet. Your

Internet connection will be disconnected when you run this conguration.

• The security mode is xed to WPA2-PSK (AES).