Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
48
Connection settings for connecting to computer
Conguring settings for a wireless LAN in Simple AP
Mode manually
If not able to congure the settings for a wireless LAN in Simple AP Mode using automatic
push button conguration (p.40), try the procedures included here to congure the
settings.
After switching the printer mode to Simple AP Mode, change the wireless LAN settings on
the computer manually.
With the network cable and USB cable left unconnected, turn on the power to
the printer.
Press the
button repeatedly to scroll through the printer connection
modes until you get to Simple AP Mode.
Button
Lamp
Lamp
Memo
The / lamp will light up if the printer is set to Simple AP Mode.
Press and hold down the button for at least 3 seconds, which will cause
the network status to be printed out.
Memo
Check the next page for details on how to print out the network status.
Î
How to check the network settings on the printer alone (p.72)
1.
2.