Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
49
Connection settings for connecting to computer
Check the network status information that was printed out.
Conīgure the network settings using the [SSID] and [Password] listed in the
<WLAN Simple AP> box.
<General><WLAN Simple AP>
Software 2.222 SSIDDIRECT-LW-1000PXXXXXXXX
PrinterLW-1000PXXXXXX Password 12345678
Bonjour EPSON LW-1000P
MAC XXXXXXXXXXXX
WLAN Mode Infrastructure
<LAN>
IP Auto(192.168.0.1/255.255.255.0)
<WLANInfrastructure>
IP Auto(0.0.0.0/255.255.255.0)
SSID SSIDXXXXXXXX
MAC XXXXXXXXXXXX
Click the Network Connection icon on the taskbar on your computer, and
select the connection with the same SSID for the network status information.
Once the screen asking for you to input the security key appears, enter the details listed
under "Password" in the network status information.
3.
4.