Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
5
Before completing settings
Network settings conguration
Important
While installing the printer driver or other software, do not connect a network cable, a
USB cable, or any other connection cable to the printer until you are instructed to do so.
This printer is compatible with the below types of network connections. Choose whichever
one you want to connect to.
• Wireless LAN (Infrastructure Mode)
• Wireless LAN (Simple AP Mode)
• Wired LAN
Note that wireless LAN connections, wired LAN connections, and USB connections can be
used together at the same time in any combination.
Important
If there are multiple computers and printers connected together, the connection
method by which printing data is rst sent is given rst priority, regardless of the
connection method used including USB connections. Try printing again if an error
message appears.
Memo
This document lists network connection methods for connecting computers and
printers together using the Windows operating system.