Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
54
Connection settings for connecting to computer
How to disconnect the printer from Simple AP Mode
Up to four wireless devices can be connected to a printer in Simple AP Mode.
When four wireless devices have already been connected, and you want to connect a new
wireless device, ๎rst you need to disconnect one of the four devices. Make sure the device
you are going to disconnect is not using the printer, and disable the deviceโs wireless
setting or connect it to another network.
Memo
If unable to specify a single device connected to the printer, change the Pre-Shared
Key (PSK) for Simple AP Mode on the printer to enable up to four wireless devices to be
connected at a time. Make sure to proceed carefully when attempting to change the
Pre-Shared Key (PSK) for Simple AP Mode as all Wi-Fi connections for devices already
connected will be disconnected if the Pre-Shared Key (PSK) for Simple AP Mode is
changed.
Check the next page for details on how to change the security key.
ร
Checking/changing the printer network settings (p.๎72)