Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
55
Connection settings for connecting to computer
Conīguring settings for a wired LAN connection
Connect the computer and printer to a commercial broadband router or hub via a LAN
cable.
Important
The computer needs to be connected to a network device such as a router and the
network enabled in advance before you will be able to proceed.
Start the Label Editor installer on a computer.
Press the [Install application and driver] button.
Check the content of the displayed License Agreement, and click [Agree]
to signify that you have read and agree to the terms and conditions of the
License Agreement. Next, follow the instructions on screen to proceed with the
installation process.
1.
2.
3.