Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
62
Connection settings for connecting to computer
Install the USB printer driver in order to set the IP address for the printer. Follow
the instructions shown on screen to install the printer driver.
Important
Follow the instructions shown on the screen to connect the printer and computer
together using a USB cable. Be sure to leave the USB cable connected once the USB
printer driver has been installed as you will need it to set the IP address.
Select [Wired LAN].
Enter the IP Address, Subnet Mask, and Default Gateway for the printer.
2.
3.
4.