Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
88
Checking/changing the printer network settings
Sending the network settings to the printer
After making changes to the network settings, press the [Send] button at the bottom of
the screen to send the edited settings details to the printer and complete the conguration
procedures.
Important
If there is a password for making changes set, the password entry screen will appear
when you press the [Send] button. Enter the password that was set. To reset the
password, you will need to initialize the printer to reset it to default settings. Once you
have nished initializing the printer, recongure all settings including the network
settings.
Î
Initializing the Network Settings (p.89)