Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
89
Initializing the Network Settings
Complete the below procedures to initialize the network settings for the printer.
Important
When the initialization process is run for the network settings, all settings related to
Wireless LAN (Infrastructure Mode/Simple AP Mode) and Wired LAN are initialized and
reset back to their factory defaults. The password used to change the network settings
will also be reset.
Check to make sure that the power to the printer is turned o.
Hold down the
/ button on the back of the printer and
the
button on the front of the printer while turning on the power to the
printer.
Button
Button
1.
2.