Compatibility Guide
Table Of Contents
- Before completing settings
- Connection settings for connecting to computer
- Connecting from a portable terminal
- Adding a second computer or portable terminal
- Checking/changing the printer network settings
- Initializing the Network Settings
- Troubleshooting
- Troubleshooting issues with network settings made using the Label Editor installer
- Troubleshooting issues with network settings made using the Network Configuration Tool
- Troubleshooting issues with wireless LAN connections (Infrastructure Mode)
- Troubleshooting issues with wireless LAN connections (Simple AP Mode)
- Troubleshooting issues with wired LAN connections
- Methods for resolving issues with not being able to connect at all
- Trademarks/Notation
99
Troubleshooting
Are there several dierent computers and network devices
connected to the same network?
When there are several computers and network devices connected to a network, the IP
addresses for the computers and network devices may not be able to be acquired from the
DHCP server, resulting in the device or devices not being able to connect to the network.
Turn o or disconnect any computer or network device not being used to increase the
number of IP addresses available.
Is the same IP address being used for more than one computer
or other device?
If the same exact IP address is used for more than one device connected to a network such
as a printer or computer, network communications may become unstable or drop out.
Check the IP address for each device and reset the IP addresses for any devices using the
same one.
Memo
Proceed to the below page if still not able to connect even after checking the above
items.
Î
Methods for resolving issues with not being able to connect at all (p.106)