Installation Manual

1
Preparation to use Label Editor
Operating environment
Before installing Label Editor, make sure that your computer satisfies the following
requirements.
Operating system Windows 10 (32bit/64bit), Windows 8.1/8 (32bit/64bit),
Windows 7 (32bit/64bit)
Hard disk space which
Label Editor uses
Approx. 300MB
Display XGA (1024 x 768), High Colour or higher
Interface USB, Ethernet 10BASE-T/100BASE-TX*, wireless LAN network*,
Bluetooth*
*Only for printers that support the network and Bluetooth interfaces.
Caution
Label Editor may not operate normally in computers upgraded to a later version of
Windows. Label Editor may also not operate normally depending on the computer
environment you use.
Installing Label Editor and the printer driver
This section describes the installation method to use when connecting this printer to a
computer with a USB cable.
If your printer model supports network connection and you want to connect it to your
computer on a network, see the manual provided with each product or “Network
Configuration Guide”.
CAUTION
Do not connect this product to your computer until the
install window tells you to do so.
How to connect this product to your computer
s
This product's user's guide.
Caution
• Make sure to install Label Editor as a user with the administrator authority.
• Before installing Label Editor, close all the other applications running on your computer.
• Make sure to install the latest version of Label Editor and printer driver. Label printing is
not available if either one of them is older.
• When connecting two or more products to one computer
The printer driver is necessary for each product individually. Installation of the printer
driver for the second or later products will start when the second (or later) product is
first connected to the computer. Install it according to the instructions displayed on the
screen. Newly installed printer drivers are named as copies of the printer driver.
Turn on your computer and start up Windows.
Close running applications if any. Close any anti-virus software or similar also.
Double-click the SetUp.exe file.
An install program starts up.
Select the language to install, and click [Next].
When the installation screen appears, confirm the content and click your
choice.
When installing both Label Editor and the printer driver
[Install application and driver]: Click this item.
When installing the printer driver only
[Install driver only]: Click this item.
When the software license agreement confirmation window appears, confirm the
content and click [Agree].
s
to Step 8
MEMO
• If the following message appears, an old version of the application is installed. Be sure to
uninstall the old one before installing the new one.
• If the following screen appears, either the application or the driver is already installed.
When adding or changing items, click [Modify].