Safety Information

Page：3of5
Precautions for human body :Remove spilled materials with protective equipment
(protective glasses and protective gloves). Do not
inhale the gas as much as possible. Moreover, avoid
touching with as much as possible.
Environmental precautions :Do not throw out into the environment.
Method of cleaning up :The spilled solids are put into a container. The leaked place is
wiped off with dry cloth.
Prevention of secondary hazards :Avoid re-scattering. Do not bring the collected
materials close to fire.
7. Handling and Storage Precautions
Handling suggestions :•Do not connect the positive terminal to the negative
terminal with electrical wire or chain.
•Avoid polarity reverse connection when installing the
battery to an instrument.
•Do not wet the battery with water, seawater, drink or acid;
or expose to strong oxidizer.
•Do not damage or remove the external tube.
•Keep the battery away from heat and fire.
•Do not disassemble or reconstruct the battery; or solder the
battery directly.
•Do not give a mechanical shock or deform.
•Do not use unauthorized charger or other charging method.
Terminate charging when the charging process doesn’t end
within specified time.
Storage :•Do not store battery with metalware, water, seawater, strong
acid or strong oxidizer.
•Make the charge amount 30 ~ 50% then store at room
temperature or less (temperature = -20~35 degree C) in a
dry (humidity: 45~85%) place. Avoid direct sunlight, high
temperature, and high humidity.
•Use insulative and adequately strong packing material to
prevent short circuit between positive and negative terminal
when the packaging breaks during normal handling. Do not
use conductive or easy to break packaging material.
8. Exposure Controls/ Personal Protection
Control parameters ：ACGIH has not been mentioned control parameters of
electrolyte
Personal protective equipment:
- Respiratory protection: Respirator with air cylinder, dust mask
- Hand protection: Protective gloves
- Eye protection: Goggles or protective glasses designed to protect
against liquid splashes
- Skin and body protection: Working clothes with long sleeve and long trousers
9. Physical and Chemical Properties
Appearance
Physical state :Solid.
Form :Cylindrical or Prismatic or Pouch (laminated)
Color :Metallic color or black (without tube if it has tube)
Odor :No odor