User Manual

Before Use
7
Cautions for Using the Printer
Before using the printer, read the “Important Safety Information” sheet included in the printer package to ensure
safe and correct use of the printer.
The following is additional precautions for using the printer.
• When cutting labels with your scissors, be careful not to cut your fingers.
• Do not attach your labels to human body, living creatures, public facilities, and other people’s property.
• Label length shown in the LCD touch panel of the printer or in a window of label editing software on a
computer is for your reference. It may not exact match with the actual length of printed label.
• Depending on the margin settings and type or length of the label, the printer may automatically feed or
cut the tape before starting printing.
• When using a plastic tape, characters or images printed on the first label may become faint or blur. In
addition, if you print on a plastic tape when a room temperature is at 15 degrees C or below, labels cut by
the half cutter may come off the backing paper, or may result in faint print.
• During printing, do not touch the tape ejection slot and the connectors (AC adapter, USB, and LAN
connectors). Doing so may cause a static electricity resulting in malfunction of the printer.
• You can save your label files or other data in the printer’s memory, however, they cannot be saved over an
extended period of time or permanently. Epson is not liable to you for any loss or corruption of your data
arising from printer failure, repair, or any other reason.
• Before attaching labels printed from the printer
Attached labels and adhesive are affected by the type of surface and by environmental conditions such as
humidity and heat. Labels may peel off, curl, or fade; printed characters may fade; color may be left behind
after removing the label; adhesive may become stuck to the attached surface. Before attaching labels, check
the type of surface and purpose of the labels.
Epson is not responsible for any damage or loss caused by labels or adhesive.