General Safety + Protect this product from rain, moisture, very high and low temperatures, siring magnetic fields and dusty environments + Disconnect power to the unit before cleaning. Do not use abrasives or solvents fo clean the surface of the unit, wipe with a clean soft cloth and a mild detergent If necessary. + Do not disassemble the meter it contains no user serviceable parts. Refer servicing fo quailed personnel only. Only the battery Is replaceable.
Meter Controls and Connections SECT 1 Power Power indicator it 2 Vertical / Horizontal polarization cottage output it 3 Signal lock indicator light 4 Charger Indicator light 5 Number key fo select channels or enter programming 6 INFO misinformation on Channel /Transponders 7 MUTE the sound 8 Exit from cement menu and save the settings 9 10 n Show the main menu on the screen of Jump back fo the previous menu In sub menu setting conditions Volume adjust or move cursor, channel of change, confirm ef Auxiliary
Box contents 1x Multiplication Meter / Analyses 1x Silicon Case 1x Protective Shoulder Bag 1x Mains Supercharger Tx Car Charger 1x Charger Extension Cable 2 F Connector Adapters 1x Jack te 3 Phonon Lead 1x BNC Adapter 1x Coax Adapter 2x Optical Adapters 1x User Guide Operation 1. Charging / Powering Connect the mains supercharger or the car charger fo the DC In port fo charge/power your meter The charger indicator LED £3 will light up during charging 2.
2.1.3 Transponder Crass OK fo enter the TP list. Use AW keys fo move the cursor then press OK fo select the TP you want. 2.1.4 Frequency The frequency of the current transponder. Input the value using the number keys. 2.1.5 Symbol Rate Symbol rate of the currant transponder. INU? the value using the number keys. 2.1.6 Polarity Use the «p> keys to select vertical or horizontal polarization 21.7 22KHZ Use the «p> keys fo tum 22kHz TONE Switch On/Off 2.1.8 DISSECT 1.
2.2 Select Terrestrial, then press OK fo enter the terrestrial Setup. 2.2.1 Country Cross OK to enter he country list. Use AV keys to move fhe cursor, then press OK fo select the country you want 2.2.2 Channel Press OK to enter the channel list. Use AW keys fo move the cursor, then press OK fo select the channel you want. 2.2.3 Frequency The frequency of the current channel, input the value using the number keys. 2.2.4 Bandwidth Use the dP» kayak fo change the bandwidth, select 5,6,7 or 8 2.2.
2.3 DB-C Select Cable, then press OK fo enter the Cable Setup. 2.3.1 Country Cross OK to enter he country list. Use AV keys to move fhe cursor, then press OK fo select the country you want 2.3.2 Channel Press OK to enter the channel list. Use AY key to move the cursor, then press OK fo select the channel you want. 2.3.3 Frequency The frequency of the current channel, input the value using the number keys. 2.3.4 Symbol Rate Input the symbol rate using the number keys. 2.3.
2.5 Network + WiFi * Ethernet + YouTube kiwifruit + Link Type: The currant ink type Is WIFI + WIFI Manager: Press OK fo enter the WI-A Manager Interface. and display the WIR device lst, select the one you want to connect fo.
2.6 Others + TV Channel List + Radii Channel List + Sat elite List + Transponder List + Motor Setup. + Sean Mods + Loop Search + Angle Calculation + Optical Power 2.6.1 TV Channel List Shows TV channel | ist and channel + Group: Press the F1 key to switch fo a different group in the Shanna lst + Lock: Press the Red key fo enter lock mode, then press OK fo mark the channel you want to lock + Skip: Cross the Green key fo enter skip mode, then press OK fo mark the channel you want to skip.
Press the Yellow key fo delete the current satellite from the list. Press the Bite key to scan the current satellite. 2.6.4 Transponder List All the transponders under the current satellite will be displayed on screen, Crass the F1 key to go to the sate life list Press the Red key fo add a new transponder fo the list. Crass the Green key fo edi the current transponder: Press the Yellow key fo delete the cement transponder Press the Blue key to scan the current transponder.
2.6.5 Motor Setup Hers ars 5 modes In motor setup: + URALS + DISSECT 1.2 + East Limit * West Limit + Disable Limit Press tha Red key to tum to the previous page: Crass the Green key fo fun to the next page. Press the Yellow key fo start TP search. Press the Blue key to recalculate motor. 2.6.6 Scan Mode + FTA Only: Select Free few-alr mode of not. + Scan Channel: Select Tradition, TV Channel or Radio Channel + Network Search: Only use In Full Scan mode. + Auto Search: Select Bind Scan or Full Scan 2.6.
2.6.10 Multimedia Before entering the Media Center Interface, connect the USB device with media stored on It fo the USB port. + Music/Picture/Movie Select media type. Select fie and press OK to play if + Record Manager Press the Red key to rename fle. Crass the Green key to apparition fle. Press the Yellow key fa lack fis. Press the Blue key fo delete fle. + Ts Record Press the OK button to record the TS file after the signal Is locked.
+ PWR Uni: Use the «> keys to select units for PWR: dBm/dBuV/dBmY. + Back LED: Use the keys fo switch he keyboard LED back light On/Off + Key Tone: Use the (p> keys to switch the key tone On /Ofi + Speaker: Use the 4 keys fo switch the speaker On/Off + 12V: Use the «I keys to switch DC 12V output On/Off. Parental Look: Use the number keys fo enter the password (default password is 1. Age Limit: Use the «I> keys fo see options: Lock All View All, 7 years, 12 years, 15 oars and 18 years press OK fo select. 2.
4. Power Supply Specification lps rig ars Manufacturer Phil ex Ciceroni Lid. London Road, Trademark. Clifford, MK NX, UK. Address Registration No. 339123 Mods! identifier VBO3A 1201508 input voting 100. 240VAC input AC redundancy §0/60Hz Pulpit voltage 12vDe Output rent 165A Output power BOW Verge no five deficiency (230V/50H) s81% Disney of iow nar (10%) (230v/50HD) 86.65% No load power consumption (230v/50tk) 0.07% 5.Troubleshooting icicle Ln lane Power not on Run Hack fo make sure power Is on.
6. Disclaimer Updates to Arm ware and/or hardware components are made regularly. Therefore some of, the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply fo your particular situation. No legal right or | entitlements may be blazoned from the description made In this manual 7. Declaration Of Conformity Phil ex Electronic Ltd.