Labnet ProBlot™ 6 and 12 Hybridization Ovens Instruction Manual Catalog Numbers: H0600A H600A-230V H1200A H1200A-230V
Table of Contents 1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2.0 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 2.1 Operation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.0 Introduction The Labnet ProBlot™ 6 and 12 hybridization ovens provide extremely stable temperature environments and smooth variable speed rotation that are ideal for blot hybridization and blot washing activities. Labnet ProBlot hybridization ovens use microprocessor controls and mechanical convection to maintain a stable temperature environment and to achieve fast chamber temperature recovery after a door opening. The oven interior is constructed from stainless steel for corrosion resistance.
3.0 Specifications Exterior dimensions (W x D x H) 19 x 17.5 x 19.5 in. (48.3 x 44.5 x 49.5 cm) Chamber dimensions (W x D x H) Chamber temperature range 14.5 x 11 x 13.5 in. (36.8 x 27.9 x 34.3 cm) Ambient, 5°C to 80°C Environmental conditions 5°C to 40°C, ≤80% RH, non-condensing Accuracy Uniformity ±0.1°C ±0.5°C Optional rocker speed Interior electrical outlet Electrical rating 8 to 40 rocks per min.
Main power switch: Turns the power to the unit On/Off. Illuminates green when On. Temperature controller and temperature set: The controller has a 3-digit display for displaying chamber temperature or setpoint information. Up and Down arrows are used to change the setpoint and controller mode of operation. To enter the setpoint mode of operation, press either the Up or Down arrows one time. The display will start to blink, going from bright to dim and will show the setpoint.
10.0 Cleaning and Maintenance NOTE: Be sure to disconnect the power cord before cleaning or decontaminating the oven. No routine maintenance is required for the electrical or mechanical components of the unit. The incubator exterior, interior, and rotisserie should be wiped down periodically with a soft damp cloth with mild soap. NOTE: Do not use chlorine-based bleach or abrasives. Any spills in the incubator and/or on the rotisserie should be cleaned up immediately. 10.
13.0 Limited Warranty Corning Incorporated (Corning) warrants that this product will be free from defects in material and workmanship for a period of one (1) year from date of purchase. CORNING DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.
To request certificates, please contact us at www.labnetlink.com. Warranty/Disclaimer: Unless otherwise specified, all products are for research use or general laboratory use only.* Not intended for use in diagnostic or therapeutic procedures. Not for use in humans. These products are not intended to mitigate the presence of microorganisms on surfaces or in the environment, where such organisms can be deleterious to humans or the environment.
