MINI LABROLLER ROTATOR User Manual H5500 H5500-230V-EU H5500-230V-UK Lit M00056 Rev.
1.0 GENERAL SPECIFICATIONS Electrical requirements: 115 volt model 230 Volt model Speed: 115 volt model 230 Volt model Motion Maximum Capacity H5500-02 H5500-15 H5500-50 Dimensions WxLxH Included accessories (H5500-02) Weight Operating conditions condensing 115V ±10% 50/60Hz, 0.03A 230V ± 10% 50/60Hz, 0.015A 24 rpm 20 rpm Rotating 36 x 1.5ml or 2.0 ml tubes 10 x 15ml tubes 12 x 5/7ml tubes 6 x 50 ml tubes 21.3 X 10.2 X 12.6 cm Rotisserie 36 x 1.5ml or 2.0 ml tubes 0.
Use caution when plugging into a grounded outlet! DO NOT touch the plug with wet hands! DO NOT unplug the unit by pulling the power cord! 3.0 LOADING THE ROTISSERIE Figure 1 The rotisserie supplied with the unit is designed to hold standard 1.5ml or 2.0ml microcentrifuge tubes (Fig 1). There are two other rotisseries available separately for different size tubes.
other types of motion, two plates should be placed on the rotisserie for proper balance. 4.0 ROUTINE MAINTANCE/ CLEANING No routine maintenance or lubrication is required Keeping the rotator clean will the help to maintain it in proper operating condition. 4.1 CLEANING The outside housing can be cleaned with a soft, damp cloth when needed. DO NOT use any aggressive or abrasive cleaners (acetone, nitro, polish etc.). This may permanently damage the rotator finish.
6.00 APPENDIX 6.1 Symbols and Conventions The following chart is an illustrated glossary of the symbols that may be used in this manual or on the product. The electrical warning indicates the presence of a potential hazard which could result in electrical shock. CAUTION This symbol refers you to important operating and maintenance (servicing) instructions within the product Instruction Manual. Failure to heed this information may present a risk of damage or injury to persons or equipment.
Declaration of Conformity Number: CE 00056 Manufacturer: Labnet International, Inc,., 31 Mayfield Ave., Edison, NJ 08837 USA Labnet International declares that the devices described below are in conformity with the EC directives listed. In the event of unauthorized modification of any of the devices listed below, this declaration becomes invalid.
LIMITED WARRANTY Labnet International, Inc. warrants that this product will be free from defects in material and workmanship for a period of two (2) years from date of purchase. This warranty is valid only if the product is used for its intended purpose and within the guidelines specified in the supplied instruction manual. Should this product require service, contact Labnet International, Inc.’s Service department at 732-417-0700 to receive a return authorization number and shipping instructions.