Operating Instructions Labnet Mini Incubator I5110 & I5110-230 July 2003
1. Specifications The Labnet Mini Incubator is a compact general purpose convection incubator capable of uniformly heating samples up to a maximum of 60C. The unit comes with a movable shelf and has a door window area so samples can be observed without opening the door causing heat loss. Temperature range: ambient +5C to 60C Controls: analog –hydraulic Unit size w x d x h: 28.5 x 28 x 33.5 cm Unit weight: 8.3 kg Chamber w x d x h: 23 x 20 x 20 cm (.325 cu. ft.
. Controls Overview 3.1 Power Switch (Front Panel) The main power switch is on the front panel and controls all power to the unit. The switch will light when the unit is energized. 3.2 Temperature Controller (Front Panel) This control knob is marked TEMPERATURE. It controls the incubtor oven operating temperature on a scale of 1 to 10. 3.3 Heating Lamp (Front Panel) This light is ON when unit is heating.
5.0 Cleaning and Maintenance ! Prior to any cleaning or maintenance of the unit, disconnect the power cord from the wall outlet. 5.1 No routine maintenance on the unit is required. 5.2 Clean the unit internally and externally with a damp cloth and mild soap. Do not immerse the unit or spill liquids into or on the unit. Use of alcohol or ammonia based cleaners on the door window may cause the window to craze. Allow the incubator to dry completely inside and out before reconnecting the power and using. 6.
