Instruction Manual

Error no.: 22Error no.: 22

Error no.: 22

Rotor is not mentioned in the rotor chartRotor is not mentioned in the rotor chart

Rotor is not mentioned in the rotor chart

Reason: Rotor is not authorized for this unit

Action: Insert only rotors authorized for this unit

Error no.: 25Error no.: 25

Error no.: 25

Power failurePower failure

Power failure

Reason: Power failure while rotor is in motion

Action: Open and reclose the lid, restart the centrifuge

Error no.: 30Error no.: 30

Error no.: 30

Radius correctionRadius correction

Radius correction

Reason: Radius correction value too big

Action: Adjust the radius correction to the correct value

Error no.: 36Error no.: 36

Error no.: 36

Relay for the frequency converter cannot be releasedRelay for the frequency converter cannot be released

Relay for the frequency converter cannot be released

Reason: Defect on the power board

Action: Call service

Error no.:50,51Error no.:50,51

Error no.:50,51

Memory failureMemory failure

Memory failure

Reason: Internal or external memory failure

Action: Restart the unit, if the failure occurs again, call service

Error no.: 55Error no.: 55

Error no.: 55

OverspeedOverspeed

Overspeed

Reason: Overspeed sensor or engine speed sensor defective

Action: Call service

Error no.: 60Error no.: 60

Error no.: 60

Engine speed sensor signal is missingEngine speed sensor signal is missing

Engine speed sensor signal is missing

Reason: Engine speed sensor defective or parting of a cable at the sensor

Action: Call service